Lei Wang, Lixin Chen*, Ping Song, Chaobo Liang, Yuanjin Lu, Hua Qiu, Yali Zhang, Jie Kong and Junwei Gu*. Fabrication on the Annealed Ti3C2Tx MXene/Epoxy Nanocomposites for Electromagnetic Interference Shielding Application. Composites Part B-Engineering, 2019, 171: 111-118. 2017IF=4.920. (1區/Top期刊：復合材料領域頂尖期刊).
Abstract: Few-layered Ti3C2Tx MXene was fabricated by ionic intercalation and sonication-assisted method, followed by thermal reduction at medium-low temperature. Then annealed Ti3C2Tx/epoxy electromagnetic interference (EMI) shielding nanocomposites were obtained by solution casting method. XRD, SEM, AFM and TEM indicated the successful preparation of few-layered Ti3C2Tx. FTIR, XPS and XRD showed that thermal reduction removed partial polar groups on the surface of Ti3C2Tx with no by-product. For a fixed Ti3C2Tx loading, compared with Ti3C2Tx/epoxy EMI shielding nanocomposites, the annealed Ti3C2Tx/epoxy EMI shielding nanocomposites exhibited relatively higher electrical conductivity and excellent EMI shielding effectiveness (SE). When the mass fraction of annealed Ti3C2Tx was 15 wt%, the annealed Ti3C2Tx/epoxy EMI shielding nanocomposites presented the optimal electrical conductivity of 105 S/m and EMI SE of 41 dB, 176% and 37% higher than that of 15 wt% Ti3C2Tx/epoxy EMI shielding nanocomposites. Furthermore, the annealed Ti3C2Tx/epoxy EMI shielding nanocomposites 5 wt% Ti3C2Tx exhibited the optimal Young''s modulus of 4.32 GPa and hardness of 0.29 GPa, respectively.
