[Composites Part A]Fabrication, proposed model and simulation predictions on thermally conductive hybrid cyanate ester composites with boron nitride fillers
作者：Yang Li#, Genjiu Xu#, Lin Tang, Yongqiang Guo, Tengbo Ma, Xiao Zhong, Qiuyu Zhang and Junwei Gu*
關鍵字：A. Polymer-matrix composites (PMCs); B. Thermal properties; D. Mechanical testing; E. Casting
論文來源：期刊
具體來源：Composites Part A: Applied Science and Manufacturing
發表時間：2018年
DCPDCE/BADCy hybrid resin and BN fillers were performed to fabricate the thermally conductive BN/DCPDCE/BADCy composites. When the molar ratio of DCPDCE/BADCy was 0.4/0.6, the dielectric constant (ε) and dielectric loss tangent (tgδ) value of the DCPDCE/BADCy hybrid resin was decreased to 2.92 and 5.08×10-3, respectively. Impact and flexural strength was increased to 10.7 kJ/m2 and 100.7 MPa, respectively. And the heat-resistance index (THRI) was 201.6oC. Furthermore, the thermally conductive coefficient (λ) of the BN/DCPDCE/BADCy composite with 30 wt% BN fillers was improved to 0.64 W/mK, about 3 times in comparison to that of pristine DCPDCE/BADCy hybrid resin. Compared to that of Maxwell and Russell models, our proposed thermally conductive model could predict the experimental λ values more precisely. THRI value was enhanced from 201.6oC (Pristine DCPDCE/BADCy hybrid resin) to 206.6oC. Moreover, the BN/DCPDCE/BADCy composite with 10 wt% BN presented the optimal impact strength (11.7 kJ/m2) and flexural strength (108.4 MPa).