- 鄒華維 教授
- 四川大學
- 網址: zouhuawei.polymer.cn 訪問量:531381
- 通信地址:四川省成都市一環路南一段24號 四川大學 高分子材料工程國家重點實驗室
- 郵編:610065
- 電話:028 85408288
- 傳真:028 85402465
- Email:hwzou@163.com
關鍵字:Thermal conductivity · High-density, polyethylene, Expandable graphite, Flake graphite, Polymer-matrix composites
論文來源:期刊
具體來源:Iran Polymer Journal, 2015, 24(7): 573-581.
發表時間:2015年
Abstract: Thermally conductive high-density polyethylene (HDPE) composites with high loadings of flake graphite (FG) and expandable graphite (EG) were prepared by melt-blending process. Thermal conductivity of the composites was measured by hot disk method, and a very high value of 13.41 W/mK was obtained for HDPE/EG composite with 60 wt% EG, which is 28.3 times and 60.4 % higher than the values obtained for the HDPE and an HDPE/FG system with 60 wt% FG, respectively. Twopoint method was applied to evaluate the electrical conductivity of the composites with various graphite loadings, and thermal percolation was observed in the vicinity of the electrical percolation threshold concentration. Dynamic rheology analysis was employed to define the geometrical changes caused by the interconnection of the inorganic fillers. The results showed that the in situ exfoliation of EG during the blending process could form more effective conductive pathways than those of FG-filled composites at the same graphite loadings. Such kind of pathways was responsible for the substantial improvement of the overall thermal and electrical conductivity of HDPE/EG composites. The results of dynamic rheology also confirmed that the thermally conductive networks were primarily formed at approximately 20 and 40 wt% of graphite concentrations for HDPE/EG and HDPE/FG composites, respectively.